AmezTreat-9002-M(ALKALINITY BUILDER)
Description Use
AmezTreat-9002-M is an alkalinity builder. It also contains organic dispersants and antifoam. AmezTreat-9002-M is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters.
General Specification
Appearance: Brown liquid
pH : Alkaline
Specific gravity: 1.10 to 1.20
Freezing point: < –20oC
Flash Point: Non-flammable
Treatment Dosage
AmezTreat-9002-M is applied to maintain the boiler water alkalinity within limits to be established by us, to suit the operating conditions. Water characteristics will determine the dosage rate.
AmezTreat-9002-M may be injected using a dosage pump, dosage pot or directly into the feed tank (whichever is appropriate to the particular plant).
Product Benefits
- Reduces acid corrosion.
- Stabilizes protective films.
- Simple monitoring procedures.
- Provides alkalinity control.
- Reduces foaming.
- Softens Silica Scales.
Potential Hazards
Causes severe burns (R35)
Spill Procedures
Flush to drain with large quantities of water, observe disposal regulations. Avoid splashing and skin/eye contact.
Productive Equipment
Wear suitable gloves and eye/face protection.
Handling Storage
Avoid contact with skin and eyes. Keep away from acid. Incase of contact with skin flush area with water for at least 10 minutes. Remove any contaminated clothing and seek immediate medical attention. Incase of contact with eyes wash thoroughly with clean water for at least 10 minutes. Cover affected eyes with sterile eye-pad and seek immediate medical attention. Incase of ingestion wash mouth thoroughly and drink plenty of water. DO NOT induce vomiting. Seek immediate medical attention
Recommended maximum storage limit is 2 years.
Packing
Available in 35 lit, 50 lit drums.