FireTreat 9F FIRESIDE ADDITIVE
Description Use
FIRETREAT 9F is a product for use in boilers using either oil or solid fuel.
FIRETREAT 9F reduces smut emission, soot deposits, and corrosion and slagging in the boilers.
The environmental nuisance of smut emission is greatly reduced or even eliminated.
General Specification
Appearance: Grey white powder
Non-flammable
Treatment Dosage
FIRETREAT 9F should be applied to the furnace as a shot dose, once or twice a day. Continuous application is not desirable. The period between treatments should only be greater than 24 hours in very small installations.
The dose is normally one part FIRETREAT 9F to 10000 parts of fuel, by weight.
Product Benefits
- Reduces soot deposits and smut emission.
- Minimizes fireside corrosion.
- Reduces slagging.
- May be introduced to a fouled boiler to soften fireside deposits.
Potential Hazards
Harmful if swallowed.
Spill Procedures
Sweep up bulk of spill and dispose of safely. Flush to drain with a large amount of water
Productive Equipment
Wear suitable gloves and eye/face protection
Handling Storage
Avoid contact with skin and eyes . Do not breathe dust
In case of contact with skin wash affected area immediately with water for at least 10 minutes. Remove any contaminated clothing. In severe cases seek medical attention. In case of contact with eyes irrigate thoroughly with clean water for at least 10 minutes. Cover affected eye with sterile eye pad if possible. Seek immediate medical attention.
In case of ingestion wash out mouth thoroughly with water. Slowly sip water whilst resting. DO NOT induce vomiting. Seek medical attention.
In case of inhalation remove from exposure, rest and keep warm. In severe cases or where exposure has been great seek medical attention.
Recommended maximum storage limit is 2 years.
Packing
Available in 50 lit drums.