AmezTreat 388( BIOCLEANING AGENT AND BIOCIDE)
Description Use
AmezTreat-388 is a broad-spectrum biocide with a very strong bio-dispersing property. It is effective in badly fouled systems, as it not only destroys bacterial colonies but also flushes out the slime and bio films. It is low foaming and effective over a wide range of pH.
General Specification
Appearance: Clear colourless to pale yellow liquid
Wt./ml: 0.9 – 1.0
pH (as is): 5 - 8
Solubility: Soluble in water
Treatment Dosage
The dose levels depend upon the microbial load in the system. The product generally performs well at a dose level of 30-75 ppm. For precleaning and to clean badly fouled system higher dose may be required. Our representative will help you in selecting the right use level for your system. AmezTreat-388 is readily miscible with water and is not affected by pH of the system. The product is applied neat and dosed at a point where good mixing can be ensured. It is recommended to stop water losses and give a minimum contact time of 10-12 hrs for best results. After this contact time, flush the system to remove dead and dislodged biomass. Water treated with the product is safe for discharge.
Handling Storage
AmezTreat-388 may cause skin and eye irritation. It is harmful if taken internally. In case of contact, flush the affected area with plenty of water. In case of prolonged contact, flush with plenty of water and get prompt medical attention. In case of ingestion, induce vomiting by administering warm salt water or any other emetic and get medical attention. Contaminated clothing should be thoroughly washed before reuse. Use of protective rubber gloves is recommended during handling of AmezTreat-388
Feeding
AmezTreat-388 can be directly fed from the container into the basin, or at any other point where good mixing can be ensured. No special feeding equipment is necessary.
Packing
AmezTreat-388 is available in 50 litres HDPE carbouys/200 litres HDPE drums.